Results 1 to 10 of 22

Thread: 355 test pipes too short?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Aug 2014
    Location
    UK
    Name
    Simon
    Posts
    120

    Default 355 test pipes too short?

    I have acquired a set of tubi test pipes. I currently have a tubi exhaust.

    So I thought it would be a fun way to spend Sunday rolling around on the floor under my 355.

    I have removed the CATs and when offering up the test pipes it seems they are about 20mm too short?

    I can just about get the rear flange to mate up but the pinch slits in the side are open i.e exhaust will escape.

    Am I missing a trick here or are they really too short?


  2. #2
    A348W's Avatar
    A348W is offline Rear lights like a farm gate - The Ferrari 348 Club Member
    Join Date
    Oct 2013
    Location
    North Wiltshire
    Name
    Adrian
    Posts
    763

    Default

    That’s an “interesting” idea of fun!

    Have you compared the test pipe side by side with the cat you took off?

    Not sure how the exhaust mounts work on the 355, but do the exhaust brackets have adjustment forward and backwards? Could they be all the way back?

  3. #3
    Join Date
    Aug 2014
    Location
    UK
    Name
    Simon
    Posts
    120

    Default

    Yeah....

    I did a lot of reading up before attempting it... "easy" "done in a couple of hours" "swap in an afternoon"

    LIES!!! ALL LIES!!!

    Anyway, I looked at the flange on one of the cats (not removed it at that point) and there was a small gap in the v on the pinch so I recreated that and they fitted up but I still don't think its the best. Anyone know if the HE flange is different ?

    I would shift the exhaust box but its already quite close to the clutch housing. 4-5mm.

    Also I bought a set of gaskets (22 on the diagram) and they are made of steel wool not solid metal. Is that right? I put the old solid ones back in.

    Anyway, it all needs to come off again.

  4. #4
    A348W's Avatar
    A348W is offline Rear lights like a farm gate - The Ferrari 348 Club Member
    Join Date
    Oct 2013
    Location
    North Wiltshire
    Name
    Adrian
    Posts
    763

    Default

    I put high flow cats on my 348 replacing test pipes. Don't fancy doing that again either!

    I don't have any knowledge of the 355 exhaust system. Form what you say you have obviously scoured Fchat threads....hopefully somebody will be along who has done it!!!

    Good luck.

  5. #5
    Join Date
    Aug 2014
    Location
    UK
    Name
    Simon
    Posts
    120

    Default

    So having looked at it again tonight I need to find out the following....

    Should I replace the solid exhaust gaskets with the steel wool type ones which I have supplied new by ES. If not is there any compression in the solid ones, i.e do I need to get a set of those?

    Secondly, and I will post a photo shortly, whats the best way to eliminate the gap in the clamp between the back box and the end of the cat bypass pipe?

    Its a tiny gap but the only way I can see to get rid of it is to move the back box towards the engine by 3mm. It will then be really close to the clutch housing.

    I want to avoid taking the bumper off if possible!

    Lastly, how tight do you go on the spring loaded clamps? I don't want to put too much stress on the whole system.

  6. #6
    Join Date
    Aug 2014
    Location
    UK
    Name
    Simon
    Posts
    120

    Default

    Name:  20190722.jpg
Views: 56
Size:  64.9 KB

Similar Threads

  1. Ferrari 355 test pipes
    By THL360F1 in forum Sales
    Replies: 1
    Last Post: 20-05-2016, 03:53 PM
  2. 355 Test Pipes on Ebay - overpriced?
    By mina in forum Ferrari Talk
    Replies: 5
    Last Post: 02-03-2009, 09:55 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •